LaserSatin

  • Laser engraving and cutting
  • Rotary engravable
  • Slightly brusged, non-glare finish
  • Microthin surface layer
  • High-value metal optic

Its surface has a slightly brushed structure, similar to the engraving material PLY 1. The UV-resistant, micro-thin coating allows very fine engravings without shadowing and is therefore also ideally suited for less powerful laser engraving machines. The surface finish is particularly effective in the colours brass and platinum (LZS-999-016 / LZ-998-016). Here, the light refracts from light to dark, depending on the viewing angle. The high-gloss, polished surface gives these colours a precious metallic character.

Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com

Warning Notes:
Caution! Flammable material. Health-hazardous fumes when heated! Risk of breakage with improper handling.

Safety Instructions:
Keep away from heat sources. Ensure adequate room ventilation during storage and use. Use a local exhaust system in areas with dust and smoke development.

Intended Use:
The product is intended for the production of signs.


Colours

satined
LZS-901 - brushed black/white
LZS-902 - brushed white/black
LZS-903 - brushed red/white
LZS-904 - brushed blue/white
LZS-905 - brushed applegreen/white
LZS-906 - brushed yellow/black
high-glossy, satined
LZS-998 - brushed platinum/black
LZS-999 - brushed brass/black

Capabilities

  • Laser
  • Laser Vector Cuts
  • Rotating Carbide
  • Hot Stamps
  • Screen Prints
  • Drills
  • Bonds
  • Saws
  • Shears
  • Punch

Properties

Finish: Slightly Brushed
Cutting Depth: 0,1 mm
Thicknesses: 1,6 mm
Standard Format: 610 x 610 mm
Temp. max: 80 °C
Engraving material: Acryl
  • UV Stable (except Brass)
  • Flexible
  • Break-Proof

Usage

  • Interior
  • Exterior (except messing)
Laser Vector Cut
Laserable
Rotary Engravable
Exterior Signage
Interior Signage
Weatherproof
Reverse Engravable

Customers also bought

Product number: 612441

Tissue Tape 244mm x 100m

  • Low tack, paper mask
  • Made for laser engraving, crystal etchings, and letter transferring
  • Protects foil from edge burn while laser engraving
  • Size 244 mm x 100 m
Product number: 619990127

Engraving Table Tape, 12,7mm x 100m

  • Hold engraving plates to the bed
  • 50-60 engravings without changing the tape
  • Size 12,7 mm x 66 m
Product number: 60987002

Magnet Badge MAG 02 #987-002

  • For self-manufacture of name badges
  • High magnetic power
  • Base is made of plastic
  • 45 x 12 mm
  • Zinc-plated steel plate w/ foam pad
  • Low weight
Product number: 604010

Suction Cup 40mm w/Screw M4x10 #4010

  • Suction cup for long-term holding
  • Apply to clean surfaces
  • Cup diamenter 40 mm
  • Screw M4 x 10 mm
Product number: 604013

Knurled Screw, clear #4013

  • Clear knurled Screw
  • Internal thread M4
  • Strong long-term holding
Product number: 61507103

Marking Stick, red #507103

  • Highlighter, fill-in paint
  • For small engravings
  • Paint stays flexible
  • Mark temperature resistance 260°C
  • Color rot